Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-899012.png)
Remove lower wishbone rear arm eccentric bolt securing nut.
Repeat procedure to remove wishbone securing nuts from opposite side.
47. Remove upper wishbone fulcrum shaft securing nut.
Repeat procedure to remove securing nut from opposite side fulcrum shaft.
48. Remove wire temporarily supporting hub assembly.
49. Remove wishbone/hub assembly from crossbeam.
Supporting hub assembly, withdraw lower wishbone eccentric bolts.
Supporting hub assembly, withdraw fulcrum shaft from upper wishbone.
Remove wishbone/hub assembly from crossbeam.
Repeat procedure to remove wishbone/hub assembly on opposite side.
