Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-903001.png)
Rear Cross-Member Bushing: Service and Repair
Removal CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These
devices restrict the number of times a nut or bolt can be used.
1. Remove suspension subframe from vehicle.
2. Position special tool 204-116 on the press-bed, with recesses uppermost.
3. Remove nut and washer from tool.
Position tool on bush with recesses accommodating the bush rebound stops.
Fit washer to tool and fit and finger tighten nut.
