Vanden Plas (X308) V8-4.0L (AJ27) (2000)
4. From engine compartment, install but do not tighten crossbeam front RH bolts.
5. From engine compartment, install crossbeam front LH bolts and tighten to 22-28 Nm.
6. Install power steering fluid reservoir.
-
Position reservoir on mounting bracket.
-
Install reservoir securing nuts and bolts.
7. From engine compartment, tighten crossbeam front RH bolts to 22-28 Nm.
8. Install lower steering column on pinion shaft.
-
Move column downwards to engage coupling splines on pinion shaft.
1. Install nut and bolt and tighten to 22-28 Nm.
9. Install shock absorber on lower wishbone.