Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-923004.png)
2. Install Special Tool 204-111 and spring assembly in suspension turret.
Position spring assembly and Special Tool in suspension turret.
Ensure spring upper rubber seat is correctly positioned and fully seated.
Engage tool dowel in turret slot.
3. Position spring pan on lower wishbone.
Rotate adjuster of Special Tool to lightly tension spring.
Align spring pan with lower wishbone bolt locations.
4. Install suitable guide pins in spring pan/wishbone bolt locations.
