Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-924015.png)
22. Install pivot pin nut.
Align marker on pivot pin flange with mark made on wishbone.
Install nut on pivot pin and ensuring pin position is not disturbed, tighten nut to 88 - 118 Nm.
23. Release brake caliper from suspension tie.
24. Install brake caliper on carrier.
Position caliper assembly on carrier.
Install guide pins and tighten to 25 - 30 Nm.
Install dust caps.
Install brake caliper spring clip.
25. Connect wheel speed sensor harness to sensor.
