Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-950005.png)
17. Install a thread protector on axle shaft.
18. Release hub from axle shaft.
^
Position hub puller 204-011 on hub studs.
^
Install securing nuts.
^
Progressively tighten puller center bolt to release hub from axle shaft splines.
19. Remove hub puller and thread protector.
^
Remove securing nuts and release puller from hub.
^
Remove thread protector from axle shaft.
20. Release parking brake cable from suspension mounting bracket.
^
Remove cable retaining clip.
^
Draw cable through suspension mounting bracket aperture.
