Vanden Plas (X308) V8-4.0L (AJ27) (2000)
7. Remove rotor nut spring-clip.
8. Remove rotor nut.
Using special tool 206-066A remove rotor nut.
9. Remove vertical link and hub assembly from special tool.
10. CAUTION: Removing the hub from the vertical link damages the wheel bearing. A new wheel bearing MUST be fitted to the vertical link.
Using a hydraulic press, remove hub from vertical link.
Place special tool on press bed.
Position vertical link and hub assembly into tool collets.
Ensure one of the disc shield screw-bosses is in the center of one of the tool collets.
Position special tool on top of hub.
Operate press to remove hub from vertical link.