Vanden Plas (X308) V8-4.0L (AJ27) (2000)
4. Position tie rod ball joint taper pin on steering arm and install and tighten securing nut to 71 - 85 Nm.
5. Install wheel speed sensor.
Position wheel speed sensor on vertical link.
Install sensor securing bolt and tighten to 8 -10 Nm.
6. Remove wire temporarily securing vertical link to road spring.
7. Install brake disc.
8. Release tension on road spring.
Rotate adjuster of special tool 204-111 to release spring tension.
Remove special tool and adaptor from spring.
9. Install road wheel.