Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-946022.png)
9. Position special tool 204-195 on hub studs and install securing nuts.
10. Slacken but do not remove hub to axle shaft securing nut.
11. Remove securing nuts and withdraw special tool (204-195) from hub.
12. Remove rear brake disc.
13. Remove parking brake shoes.
14. Remove wheel speed sensor.
Disconnect wheel speed sensor harness from sensor
Remove wheel speed sensor securing bolt and withdraw sensor from hub carrier.
