Vanden Plas (X308) V8-4.0L (AJ27) (2000)
11. Using hydraulic press, remove hub and outer bearing assembly from carrier. Position large section of special tool JD132 on press bed, with recess
in tool upper most.
Position hub carrier on tool, ensuring parking brake cable housing locates in tool recess.
Position small section of special tool JD132 on hub.
Align assembly to press-ram, and operate press to remove hub from hub carrier.
12. Remove ABS rotor and inner bearing from hub carrier.
Remove ABS rotor.
Remove inner bearing.
13. Remove outer bearing assembly from hub.
Remove bearing shim.
Remove bearing spacer.