Vanden Plas (X308) V8-4.0L (AJ27) (2000)
18. Determine hub end float.
Measure and record end-float as a datum.
Calculating from datum, select a shim that will achieve a 0.076 mm end-float.
19. Install new bearing shim.
Install selected shim.
Install inner bearing.
Using special tool 205-234, install inner bearing seal.
20. Place block of wood on hydraulic press-bed and position hub carrier on block.
21. CAUTION: Do not allow press load to be directed on to hub studs.
Align ABS rotor to hub and operate press to fully seat rotor on hub.