Vanden Plas (X308) V8-4.0L (AJ27) (2000)
31. Using new tie strap, secure wheel speed sensor harness to hub carrier.
32. Install handbrake shoes.
33. Install brake disc.
34. Position special tool 204-195 on hub studs and install securing nuts.
35. Tighten hub nut to 304 - 336 Nm.
36. Remove securing nuts and withdraw special tool 204-195 from hub.
37. Install rear wheel.
38. Remove stands and lower vehicle onto wheels.
39. Raise vehicle on four-post lift.