Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-946049.png)
3. Install pivot pin sleeve in hub carrier.
4. Pack new pivot bearings with Shell Retinax 'A' grease.
5. Install pivot bearings in hub carrier.
Slide bearing over pivot sleeve and seat in bearing cup.
Install a 3.905 mm (minimum size) shim to sleeve.
Repeat procedure to install opposite end bearing and shim.
6. Press pivot pin sleeve into hub carrier.
Install pivot pin in sleeve and position a piece of tube over part of thread.
