Vanden Plas (X308) V8-4.0L (AJ27) (2000)
9. From inside the vehicle.
10. NOTE: When setting the selector cable, ensure that the transmission selector does not move from the N position.
Adjust the selector cable.
Position the shift in the N detent
Adjust the nuts to lock against the bracket without moving the set position of either the shift lever or the selector lever.
Tighten the locknuts to the specified torque figure
Verify the N setting.
11. Further installation is the reverse of the removal procedure.
12. Connect the battery and fit the battery cover..
Reset the radio and the clock.