Vanden Plas (X308) V8-4.0L (AJ27) (2000)
12. Remove the shift lever assembly from the housing.
Remove the washer from the pivot shaft.
13. Disassemble the shift mechanism.
Remove the return spring.
Remove the pivot shaft nut, washer and pivot shaft.
Remove the pivot bracket detent plate and washer.
Remove the ball and spring.
14. Clean all components.
Installation
1. Reassemble the shift mechanism.
Apply grease and install the detent ball and spring.
Apply grease to the pivot bracket and install the bracket, detent plate and washer.
Install the pivot shaft, washer and nut.
Apply grease and locate the return spring.