Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Wiring Harness: Service and Repair
Internal Harness Multiplug O-Rings
Internal Harness Multiplug O-Rings
Removal
1. Disconnect battery ground cable.
Remove the battery cover.
2. Raise the vehicle for access.
3. Remove the fluid pan. Refer to Transmission and Drivetrain.
4. Remove selector cable abutment bracket fixings (2) and reposition the bracket for access to the multiplug.
5. Disconnect the transmission harness multiplug.
Release the harness locking lever.
Disconnect the harness multiplug.