Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-666002.png)
6. Prepare the hub carrier
Slacken the hub carrier fulcrum nut
Disconnect the ABS sensor multiplug at the hub carrier
7. Protect the driveshaft thread with special tool JD 1D/7
8. Withdraw the hub from the axle shaft
CAUTION: Take care not to introduce debris into the hub bearings, or damage the seal
Using service tool 204-011, push the axle shaft through the hub
