Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1399001.png)
Rear Door Window Motor: Procedures
Removal
1. Remove lift motor and regulator assembly from door. See: Window Regulator/Front Door Window Regulator/Service and Repair/Procedures
2. Slacken and remove three screws securing motor to regulator.
3. Remove lift motor from regulator.
Installation
1. Position lift motor on regulator and fit and tighten securing screws.
2. Fit lift motor and regulator assembly in door. See: Window Regulator/Front Door Window Regulator/Service and Repair/Procedures
