Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Window Shade: Service and Repair
Rear Window Blind (76.14.04)
Removal
1. Remove rear seat cushion.
2. Remove rear seat squab.
3. Remove rear parcel tray.
4. Place parcel tray face down on clean bench.
5. Remove sunblind assembly.
-
Slacken and remove nuts securing sunblind to parcel tray.
-
Remove washers.
-
Remove sunblind from parcel tray.
-
Repeat procedure to remove opposite side sunblind.
Installation
1. Position sunblind on parcel tray.
2. Install washers on sunblind studs.
3. Install nuts on sunblind studs and tighten nuts to 5-7 Nm.
4. Repeat above procedure to install opposite side sunblind.
5. Install parcel tray/sunblind assembly.
6. Install rear seat squab.
7. Install rear seat cushion.