Vanden Plas (X308) V8-4.0L (AJ27) (2000)
6. Remove jet assembly from bumper.
1. Slacken and remove screws securing jet assembly to bumper.
2. Slide jet assembly forward and remove from bumper.
Installation
1. Position jet assembly in bumper and fit and tighten securing screws.
2. Fit cover over jet assembly and fit and tighten securing screw.+
3. Connect hose onto rear of jet assembly and secure with new plastic clip.
4. Fit wheelarch liner.
5. Fit road wheel.+
6. Remove stands and lower vehicle onto wheels.