Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1432002.png)
7. Slacken and remove nut securing engine harness main multiplug to mounting bracket and position multiplug for access.
8. Slacken and remove two nuts and bolt securing purge valve mounting bracket to bulkhead and position assembly for access.
9. Slacken and remove two bolts securing throttle cable adjustment bracket to throttle body.
10. Release lower clips and slacken and remove the screws and upper bolts securing plenum closure panel/wiper motor assembly to BIW.
11. Guiding wiper spindle through BIW aperture, remove closure panel/wiper motor assembly from vehicle.
Installation
