Vanden Plas Brake Master Cylinder Service and Repair Guide
^
Install pivot pin.
^
Install nut and tighten to 17 - 23 Nm.
6. Install clevis pin connecting the brake pedal to the master cylinder push-rod fork.
^
Apply grease to the clevis pin.
1. Install clevis pin.
2. Install retaining clip.
3. Install grommets.
7. Install pedal housing, brake booster and master cylinder assembly.
8. Install engine compartment rear cover.
9. Reconnect battery ground cable.
10. Bleed brake system.
11. Remove paint-work protection covers and close engine compartment.