Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
2. Install HCU.
^
Taking care not to distort brake tubes position HCU into bracket.
^
Install bolts and tighten to 8 - 10 Nm.
3. NOTE: To minimize brake fluid loss, install the brake tubes to the HCU in the order shown.
Install brake tubes to HCU.
^
Remove plugs from outlet HCU ports and brake tubes.
1. Install and tighten outlet brake-tube union nuts. Refer to Antilock Brakes / Traction control Systems, Specification for torque setting.
^
Remove plugs from inlet HCU ports and brake tubes.
2. Install and tighten inlet brake-tube union nuts. Refer to Antilock Brakes / Traction control Systems, Specification for torque setting.
4. Remove cloth from underneath HCU.