Service and Repair for Stabilizer Bushing on Vanden Plas X308 V8-40L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-743004.png)
4. Position stabilizer bar assembly on link arms and install but do not tighten nuts.
5. Install stabilizer bar mounting bolts.
^
Install but do not tighten stabilizer bar LH mounting bracket bolts.
^
Install stabilizer bar RH mounting bracket bolts and tighten to 30 - 40 Nm.
^
Tighten LH mounting bracket bolts to 30 - 40 Nm.
6. Secure link arms to stabilizer bar.
^
Tighten LH link arm to stabilizer bar nut to 60 - 80 Nm.