X-Type (X400) V6-2.5L (2005)
Radiator Cooling Fan Control Module: Service and Repair
Control module
Cooling Fan
Removal
1. Remove the air cleaner.
2. Remove the air cleaner intake pipe.
3. Remove the battery tray.
4. Disconnect the cooling fan motor electrical connectors.
^
Left-hand side shown, right-hand side similar.
5. Disconnect the cooling fan motor control module electrical connectors.
6. Detach the cooling fan motor control module electrical connectors from the cooling fan shroud.
7. Detach the cooling fan motor control module Wring harness from the cooling fan shroud.
8. Remove the cooling fan motor control module.
Installation
1. To install reverse the removal procedure.