X-Type (X400) V6-3.0L (2002)
/v6-3.0l/Page-1470001.png)
Trip Computer: Description and Operation
Trip Computer
Pressing the trip computer displays trip data on the message center. Warning and information messages have priority over trip data. If a driver
information message is displayed prior to activation of the trip computer, the trip data will appear for 10 seconds only, before being replaced by the
original message.
Each successive press of the trip switch causes the computer to continually cycle through the stored data which is then displayed on the message center.
The trip computer switch pack, mounted on the headlamp switch is only enabled while the trip computer output is displayed. Refer to the Drivers
Handbook for full operating instructions.
Driver's Information/Message Center See: Driver/Vehicle Information Display/Description and Operation