X-Type (X400) V6-3.0L (2002)
/v6-3.0l/Page-358002.png)
5. Remove the oil cooler.
-
Remove the oil cooler retaining bolt.
-
Remove and discard the oil cooler O-ring seal.
Installation
1. To install reverse the removal procedure.
2. NOTE: Make sure the oil cooler locating tag is correctly located.
Install the oil cooler.
-
Install a new oil cooler O-ring seal.
-
Install the oil cooler retaining bolt.
-
Tighten to 57 Nm.