X-Type (X400) V6-3.0L (2002)
/v6-3.0l/Page-364005.png)
12. Detach the intake manifold support bracket.
13. Remove the intake manifold.
-
Remove and discard the intake manifold gaskets.
Installation
1. NOTE: The intake manifold retaining bolts in position 1, 2 and 3 are longer than the retaining bolts in position 4, 5 and 6.
To install, reverse the removal procedure.
-
Install the new intake manifold gaskets.
-
Complete the tightening sequence.
-
Tighten to 10 Nm.