jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

ABOUT US
A/C/Body - Water Leaks Onto Passenger Floor|Page 5437 > < A/C/Body - Water Leaks Onto Passenger Floor

X-Type (X400) V6-3.0L (2002)

Page 2
background image

6.

For pollen filter housings with a double slot, cut and remove material from water shield (Illustration 1).

Note:

Ensure that the four corners of the original cutout remain for location purposes.

Note:

Sufficient material should be removed to allow water shield to seal flat against housing.

7.

Remove and discard backing paper from water shield, align and affix water shield to pollen filter housing. (Illustration 2 if single slot pollen filter
housing) (Illustration 3 if double slot pollen filter housing).

8.

Install pollen filter housing.

9.

Install and tighten pollen filter housing securing nuts.

10.

Install pollen filter. (See Workshop Manual, section: 412-01, SRO 76.10.09).

Parts Information:

A/C/Body - Water Leaks Onto Passenger Floor|Page 5437 > < A/C/Body - Water Leaks Onto Passenger Floor