X-Type (X400) V6-3.0L (2002)
/v6-3.0l/Page-706003.png)
10. Remove the fuel pressure sensor.
-
Remove and discard the gasket.
Installation
All vehicles
1. NOTE: Install new fuel injector O-ring seals.
To install, reverse the removal procedure.
-
Lubricate the fuel injector O-ring seals with clean engine oil.
Vehicles with 2.5L or 3.0L engine
2. NOTE: Install a new gasket.
Tighten to 10 Nm.
Vehicles with 2.0L engine
3. Tighten to 10 Nm.