jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Fluid - A/T|Capacity Specifications|Page 2911 > < Fluid - A/T|Capacity Specifications|Page 2909
Page 2
background image

7. If the automatic transmission fluid does not come out of the transmission fluid level tube the automatic transmission fluid level is insufficient. If

this is the case add the automatic transmission fluid in 0.5 litre units into the automatic transmission fluid charging pipe until the automatic
transmission fluid comes out of the automatic transmission fluid level tube.
^

Remove the automatic transmission fluid charging pipe cap.

NOTE:  Use automatic transmission fluid WSS-M2C922-A1 or equivalent meeting Jaguar specification.

8. Allow the automatic transmission fluid to come out of the automatic transmission fluid level tube until the overflow stops at a temperature of no

more than 40°C (104°F).

NOTE:  Make sure the automatic transmission fluid temperature does not exceed 40°C (104°F). If the automatic transmission fluid temperature
does exceed 40°C (104°F) stop the automatic transmission fluid level check and allow the automatic transmission fluid to cool until the
temperature reaches 30 to 40°C (86 to 104°F). 

9. If when the automatic transmission fluid level plug is first removed and automatic transmission fluid comes out of the automatic transmission fluid

level tube, allow the automatic transmission fluid to come out of the automatic transmission fluid level tube until the overflow stops at a
temperature of no more than 40°C (104°F). 

NOTE:  Make sure the automatic transmission fluid temperature does not exceed 40°C (104°F). If the automatic transmission fluid temperature
does exceed 40°C (104°F) stop the automatic transmission fluid level check and allow the automatic transmission fluid to cool until the
temperature reaches 30 to 40°C (86 to 104°F). 

Fluid - A/T|Capacity Specifications|Page 2911 > < Fluid - A/T|Capacity Specifications|Page 2909