X-Type (X400) V6-3.0L (2002)
/v6-3.0l/Page-867001.png)
Clutch Master Cylinder: Service and Repair
Removal
1. Remove the brake fluid reservoir filler cap.
WARNING: DO NOT ALLOW BRAKE FLUID TO CONTACT THE SKIN OR EYES. IF BRAKE FLUID COMES INTO CONTACT
WITH THE SKIN OR EYES, RINSE THE AFFECTED PLACES IMMEDIATELY WITH WATER. FAILURE TO FOLLOW THIS
INSTRUCTION CAN RESULT IN PERSONAL INJURY.
CAUTION: If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water.
NOTE: Make sure the filler cap does not become contaminated.
2. Using a suitable suction device drain the brake fluid reservoir.