X-Type (X400) V6-3.0L (2002)
/v6-3.0l/Page-887013.png)
13. Attach the driveshaft front universal joint.
1. Install a new gasket.
2. Install new driveshaft retaining bolts link washers.
3. Install new driveshaft retaining bolts.
^
Tighten to 40 Nm.
14. Attach the driveshaft rear universal joint.
1. Install a new gasket.
2. Install new driveshaft retaining bolt link washers.
3. Install new driveshaft retaining bolts.
^
Tighten to 40 Nm.
15. Carry out the under body misalignment check.