X-Type (X400) V6-3.0L (2002)
/v6-3.0l/Page-946005.png)
b) Install new driveshaft retaining bolts.
c) Tighten to 44 Nm.
13. Attach the engine roll restrictor. Tighten to 80 Nm.
14.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
NOTE: The lower lip of the sill must be 540mm from the floor.
Raise and support the left hand side of the vehicle
15. Fill the transfer case with 400ml of oil. Tighten the filler plug to 20Nm.