XJ-12 (X300) V12-6.0L (1995)
Trunk / Liftgate Lock: By Symptom
Technical Service Bulletin # 13_21
Date: 950101
Campaign - Trunk Release Button Sticking
Sedan Range
DATE: 1/95
13-21
Trunk Release Button - Sticking -
Repair Procedure - Service Action S614
MODEL
1995 MY
Sedan Range
VIN
724754-728294
ISSUE:
The trunk release button of 1995 MY Sedan Range vehicles (VIN 720001 - 723562) may stick in position when the button is depressed.
ACTION:
Replace the trunk release button on 1995 MY Sedan Range vehicles within the VIN range at the next service opportunity.
TRUNK RELEASE BUTTON REPLACEMENT PROCEDURE:
1.
Remove the interior trunk lights from the trunk lid.
2.
Remove the trunk lid trim pad and disconnect the release button electrical connector.
3.
Remove the exterior trunk lid finisher.
NOTE:
The trunk release button is secured to the inside of the trunk lid finisher.
4.
Remove and discard the existing trunk release button assembly and securing screws.
5.
Fully seat a new trunk release button assembly to the trunk lid finisher. Apply Loctite 290 to the threads of the new screws (part number JSL
10308 D) and secure the release button assembly.
6.
Run the release button harness through the trunk lid and seat the sealing grommet
7.
Install the trunk lid finisher and connect the release button electrical connector.
8.
Fit the trunk lid trim pad and trunk lights.
9.
Check the operation of the trunk lights and the trunk release button.
PARTS INFORMATION:
DESCRIPTION
PART NUMBER
QTY
Trunk release button - Grey Jaguar head on green background
GNA 3520BB
1
Trunk release button VDP - Gold Jaguar head on red background
GNA 3520AB
1
Screw
JSL 10308D
2