XJ-12 (X300) V12-6.0L (1995)
Impact Sensor: Service and Repair
Airbag Crash Sensor ('A' Pillar)
Impact Sensors
-
Disconnect the battery and wait for one minute before attempting sensor removal.
-
Remove 'A' post lower trim pad for access, see 'Body and Frame, Interior Trim, Trim Panel.' See: Body and Frame/Interior Moulding / Trim/Trim
Panel
-
Remove ignition/injection control module.
-
Carefully reposition and disconnect sensor multi-plug located inside the 'A' post lower aperture.
-
Remove lower sensor fixing and sensor from vehicle.
-
Refit the sensor in reverse order to removal procedures.