XJ-6 L6-4.0L (1991)
Flex Plate: Service and Repair
Remove
- Disconnect the kickdown cable from the throttle linkage.
- Remove the bolt securing the transmission dipstick tube to the inlet manifold.
Engine Support Tool
- Fit Service Tool 18G 1465 to the rear of the inlet manifold and take the weight of the engine with MS53B.
- Place drain tin below the transmission, drain the fluid.
- Disconnect the exhaust front pipe.
Rear Engine / Transmission Mount
- Taking the weight of the transmission unit, remove the rear mounting to body securing bolts, lower the jack and collet the spacer.
- Disconnect the propeller shaft from the drive flange.
Transmission Selector Cable & Switch