XJ-6 L6-4.2L (1983)
Dashboard / Instrument Panel: Service and Repair
Fascia Crash Roll
Removing
- Disconnect the battery
- Prise demister air direction vents (1, Fig. 46) from crash roll.
- Remove four screws (2, Fig. 46) securing front of crash roll to screen rail.
- Prise map light (3, Fig. 46) from housing in crash roll.
- Remove in-car sensor.
- Detach Lucar connectors (4. Fig. 46) from map light.
- Lift crash roll from car.
Refitting
- Position crash roll on fascia.
- Refit map light and in-car sensor.
- Secure crash roll to fascia with four screws. Push demister vents into crash roll.
- Reconnect battery and test map light for correct operation.