XJ-6 (X300) L6-4.0L (AJ16) (1996)
Trunk / Liftgate Weatherstrip: Service and Repair
TRUNK SEAL RETAINER, REMOVAL AND INSTALLATION:
Fig. 1
-
Displace and remove the left and right hand tail light covers.
-
Remove the trunk floor and battery box tray.
-
Slacken and remove the fir-tree fasteners securing the tread plate to the body (arrowed in Image).
-
Remove the trunk seal retainer by pulling this vertically up. (This releases the the retainers integral snap on fixings from the sill panel top).
-
Note the harness being clipped top the retainer lower edge.
-
Unclip cross car harness from lower edge of retainer.
Refit in the reverse order of the removal procedure.