XJ-6 (X300) L6-4.0L (AJ16) (1996)
/l6-4.0l_(aj16)/Page-1688001.png)
Cruise Control Switch: Description and Operation
-
Paddle Switch; comprises the on, off and resume/cancel switches.
-
ON movement of the paddle towards the driver turns the system on and illuminates the 'ON' indicator.
-
RESUME; momentary movement of the paddle towards the driver, when speed control has been disabled, (but not switched off) activates the
'resume' facility causing vehicle speed to revert to the previous set value.
-
CANCEL; momentary operation of the paddle towards the driver, while speed control is operating, disengages the system (but does not turn it
off).
-
OFF; movement of the paddle away from the driver turns the system off and extinguishes the 'ON' indicator.
-
Set Button; sets the required controlled vehicle speed when initially operated momentarily i.e. before control system is active. Prolonged pressure
on the set button, when speed control is active, causes actual vehicle speed to increase until the required controlled speed is achieved. A
momentary operation of the button, when speed control is active, increases vehicle speed at the rate of 1 mile/hour per operation
Selection Switch Assembly, Fig.1
