XJ-6L (X300) L6-4.0L (AJ16) (1997)
Front Door Exterior Handle: Service and Repair
Driver Door Handle
Fig. 1
-
Remove door veneer panel.
-
Remove door upper trim pad.
-
Remove door lower trim pad.
-
Using a suitable plastic knife, cut through the weather- shield to door sealant and reposition weathershield for access.
-
Remove handle assembly mounting bracket (1 Fig.1).
-
Disconnect door handle operating link rod from lock assembly and lock arm (2 Fig.1).
-
Undo fixings securing handle assembly and remove handle assembly (3 Fig.1).
Refit in the reverse order of the removal procedure.
NOTE: Fig.1 shows front door components only.