XJ-6L (X300) L6-4.0L (AJ16) (1997)
Sunroof / Moonroof Weatherstrip: Service and Repair
SLIDING ROOF PANEL SEAL:
-
Remove sliding roof trim panel for access.
-
Remove sliding roof panel for access.
-
Undo and remove sliding roof panel securing screws and remove panel / seal assembly (Image).
-
Displace and remove seal from sliding roof panel.
-
Clean sliding roof panel flange thoroughly
-
Fit and seat new seal to the sliding roof panel flange ensuring that seal joint is central at the rear of the panel flange.
-
Using a junior hacksaw, carefully cut off any excess seal ensuring that the seal ends butt together.
NOTE: Prior to using crimping tool, ensure seal is correctly seated.
-
Crimp into position using tool JD 200, rotating tool jaw as required.
-
Repeat crimping operation a second time to ensure a continuous crimp.
-
Refit all remaining components in the reverse order of removal procedure.