XJ-8 Sedan (X308) V8-4.0L (AJ26) (1998)
4. Slacken and remove screws securing veneer panels to door glass switch/ashtray assembly.
5. Remove veneer panels from switch/ashtray assembly.
Installation
1. Position veneer panel over switch/ashtray assembly and fit and tighten securing screws.
2. Position switch/ashtray assembly on armrest and fit and tighten the two securing screws.
3. Fit armrest to door casing. See: Arm Rest/Service and Repair
4. Fit casing to door. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair