jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

ABOUT US
ABS / Traction Control Module <--> [Electronic Brake Control Module]|Specifications|Page 86 > < ABS / Traction Control Module <--> [Electronic Brake Control Module]|Specifications|Page 84

XJ-8 Sedan (X308) V8-4.0L (AJ26) (1998)

Page 5
background image

3. NOTE:  To minimize brake fluid loss, install the brake tubes to the HCU in the order shown.

Install brake tubes to HCU.
Remove plugs from outlet HCU ports and brake tubes.
Install and tighten outlet brake-tube union nuts. 
Remove plugs from inlet HCU ports and brake tubes.
Install and tighten inlet brake-tube union nuts. 

4. Remove cloth from underneath HCU.

5. Connect electrical connectors to the ABS/TCCM.

Connect electrical connector.
Connect electrical connector.
Push plunger downwards.

6. Remove special tool from brake pedal.
7. Reconnect battery ground cable.
8. Bleed brake system. 

ABS / Traction Control Module <--> [Electronic Brake Control Module]|Specifications|Page 86 > < ABS / Traction Control Module <--> [Electronic Brake Control Module]|Specifications|Page 84