XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1220001.png)
Front Door Exterior Handle: Service and Repair
Driver Door Handle
DRIVER DOOR EXTERNAL HANDLE
Removal
1. Motor door glass to fully up position.
2. Remove battery cover and disconnect ground cable from battery terminal.
3. Remove door casing veneer panel.
4. Remove door casing for access.
5. Feeding electrical harness through water shedder, carefully peel shedder from door and place adhesive face down on a clean dry polythene sheet.
6. Position PVC inner sheet for access.
7. Disconnect outer handle link rod from lock assembly.