XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1251010.png)
27. Release engine from support tool.
Slacken hook adjustment nuts until weight of engine is released.
Remove hooks from engine front lifting eyes.
Remove special tool 303-021 from fender channel.
28. Install crossbeam to engine Hydramount bolts.
Install bolt securing Hydramount to crossmember and tighten to 22 - 28 Nm.
Repeat procedure to install crossmember opposite side securing bolt.
29. Position and connect harness to steering transducer.
RHD vehicles. Position steering harness behind return pipe.
Connect harness to transducer.
