XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)
Dimmer Switch: Service and Repair
Rheostat Switch 86.65.07
Removal
1. Move driver seat fully rearward.
2. Disconnect battery ground lead.
3. Displace lower cowl for access.
4. Remove rheostat switch from cowl.
1. Disconnect dimmer module to rheostat switch connector.
2. Disconnect column tilt switch connector.
3. Remove lower cowl.
4. Pull adjusting knob from switch.
5. Remove screw.
6. Remove switch.
Installation
1. Installation is reverse of removal.
2. Reconnect battery ground lead.