jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

ABOUT US
ABS / Traction Control Module <--> [Electronic Brake Control Module]|Specifications|Page 83 > < ABS / Traction Control Module <--> [Electronic Brake Control Module]|Specifications|Page 81

XJ-8 Sedan (X308) V8-4.0L (AJ27) (1999)

Page 2
background image

6. Tighten bleed nipples to:

Front caliper bleed nipple 4 - 6 Nm. 
Rear caliper bleed nipple 8 - 11 Nm. 
Remove bleed tubes and containers.

7. Disconnect electrical connectors from ABS/TCCM.

Pull plunger upwards.
Disconnect electrical connector.
Disconnect electrical connector

8. CAUTION:  Remove brake fluid spillage immediately from paint work, with clean water.

Position an absorbent cloth underneath the HCU to collect brake fluid spillage.

9. NOTE:  To minimize brake fluid loss, release the brake tubes from the HCU in the order shown.

ABS / Traction Control Module <--> [Electronic Brake Control Module]|Specifications|Page 83 > < ABS / Traction Control Module <--> [Electronic Brake Control Module]|Specifications|Page 81