XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
40. Release tie rod ball joint from steering arm.
1. Fit special tool 211-098 to tie rod ball joint.
2. Tighten tool bolt to release ball joint taper pin.
3. Remove tool and release tie rod from steering arm.
-
Repeat procedure to release opposite side tie rod ball joint.
41. Remove steering harness from LH suspension turret.
-
Release harness securing clips from suspension turret.
-
Mark position of clips on harness.
-
Remove tape securing clips to harness and discard clips.
42. Disconnect and remove steering harness.
-
Disconnect harness connector from transducer.
-
Remove harness from suspension assembly.
43. Remove steering rack from crossbeam.
1. Remove steering rack securing bolts.
2. Remove steering rack and mounting brackets.