XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
Installation
Installation
1. Place crossbeam on press bed.
2. Position bush on crossbeam, aligning moulded pointer with small recess.
3. Using a suitable mandrel, press and partly seat bush in crossbeam.
4. Fully seat bush in crossbeam.
-
Position a suitable support on press bed.
-
Place crossbeam/bush on support.
-
Position a suitable mandrel on bush.
-
Ensuring bush remains aligned with crossbeam, operate press to fully seat bush.
5. Install front mounting brackets.
-
Position and fully seat mounting bracket on crossbeam.
-
Install the four bolts and tighten to 22-28 Nm.
-
Install heatshield.
-
Repeat procedure to install mounting bracket on opposite side of crossbeam.